The mass of self-winders under the steamers loves custom coils. Clapton, Alien Clapton, Fused Clapton and many more. Although most of them like to come back to simple Wirecoils in between, those who have tasted the steam and often especially the taste of good custom coils will not be able to get away again.
The Custom Coils by Ziko are fine fused claptons made of the material nickel-chrome. Each coil is made by hand by Ziko himself. Once you have installed and vaped the Ziko Coils, you should be warned that there is an acute addictive danger. The taste development is exceptionally good, the coils respond very quickly and can be operated easily even with weaker wattages.
The coils were dubbed "magic wire" by Mario Vapor of Vapor Giant. The name is actually very close to reality. Coil master Ziko has a processing step in his production that he keeps secret and which brings the taste of every liquid incredibly well over.
Everyone knows the unattractive results when a coil was too long in the atomizer, preferably with very sweet liquid. You open the tank look at the deck and consider whether this coal briquette must be disposed of as hazardous waste.
If you have installed a Ziko coil, you will heat up the winding neatly, rinse it with water, repeat it once or twice and the coil almost looks like it has just been removed from its glass tube. For most windings, it works just fine once or twice. After that, unfortunately, often the taste. For the Custom Coils by Ziko, it works really well for months. A true magic wire.
Contains: 2x Fine Fused Clapton Ni80 - Handmade by Ziko
Wire material: NiCr 80/20
Single Coil: 0.37 Ohm
Dual coil: 0.22 ohm
Inner diameter: 3mm
- The coils can be lit with a maximum of 40 - 50 watts at pulsing intervals. Hotspots are detected in time and can be eliminated. Padded and saturated with liquid, they can be operated with higher performance.
- Hotspots are created by aligning the coils during installation and are not a manufacturing defect.
- built-in coils are excluded from the exchange & Warranty.
- Defects that occur during alignment, installation, over-performance, and overfeeding are also covered by the exchange & Warranty excluded.
- It is the user's responsibility to dispose of devices and their consequences through improper use, as well as changing the number of turns and thus the resistances.